-
Flange-type assembled thermocouple
Prefabricated thermocouples are key components in industrial temperature measurement, operating based on the Seebeck effect. They are sturdy and durable, suitable for harsh environments ranging from 0°C to 1800°C. Type K is the most commonly used due to its high cost-performance ratio. When selecting a model, factors such as temperature, … -
Threaded explosion-proof thermocouple temperature sensor
The fixed threaded explosion-proof thermocouple is a temperature sensor that finds extensive application in industrial automation systems. Through this temperature sensor, the temperature parameters of the controlled object can be converted into electrical signals, which are then transmitted to display, recording, and regulating instruments for monitoring, adjusting, and controlling the … -
K/J/T/E/N/S/ B Type Mini and Standard Thermocouple Connector Plug
Product Description thermocouple connector with metal sheath or lead cable is widely used in aviation, nuclear, petroleum,chemical,metallurgical,mechanical,electrical and other industrial sectors and scientific fields; K type is usually used with indicator, recorder,controller, and computer and other devices. K type can direct measure a variety of liquid, steam& gas and solid surface … -
Probe-type K-type thermocouple
Product Name Probe-type K-type thermocouple Model WRNT-KH-035 Thermocouple Type K (default), E, J, T, Pt100, etc. Measurement Range K type: 0-600°C E type: 0-400°C Pt100: -50+420°C Protection Tube Material 304 Stainless Steel Protection Tube Diameter 4mm (default), with optional custom diameters including 3mm, 5mm, 6mm, etc. Protection Tube Length 30mm … -
IEPE vibration sensor
KH400A IEPE piezoelectric accelerometer is a low-frequency high-sensitivity piezoelectric accelerometer with built-in IEPE circuit; it converts the charge output by the charge-type piezoelectric sensor into a low-impedance voltage output through a preamplifier installed inside the sensor . IEPE type sensors are usually in the form of two-wire output, that is, a constant current source is used for power supply; the same line is used for power supply and signal. Usually the DC part is filtered out by a high-pass filter at the output of the constant current power supply. -
integrated vibration transmitter
Introduction KH-HZD integrative vibration sensor , integrating the traditional vibration sensor and the accuracy measuring circuit together, not only achieve “sensor + transmitter” mode Acceleration measurement system function, but also achieve economic but high accuracy Acceleration measure system. The transmitter can connect directly with PLC, DCS or other systems. Mounted on … -
integrative Explosion-proof integrative vibration sensor
Introduction KH-HZD integrative Explosion-proof integrative vibration sensor, integrating the traditional vibration sensor and the accuracy measuring circuit together, not only achieve “sensor + transmitter” mode vibration measurement system function, but also achieve economic but high accuracy vibration measure system. The transmitter can connect directly with PLC, DCS or other … -
Eddy current sensors
Specification Output -24V power supply，-2 to -18V output Probe selection（mm） Φ5 | Φ8 | Φ11 | Φ18 | Φ25 Range selection 1 | 2 | 4 | 8 | 10 linearity ≤1% Introduction Eddy current sensors can accurately measure the distance between the measured object (which must be a metal … -
Temperature vibration integrated transmitter
Specification Sensitivity 20mv/mm/s±5% ~ 50mv/mm/s±5% Frequency response 5～1000Hz Natural frequency 10Hz Range 0～50 mm/s / 0～500um Maximum acceleration 100g Temperature 200℃ Output 4~20mA / RS485 Introduction The temperature vibration integrated transmitter uploads the monitored internal temperature and vibration speed of the machinery to digital display meters, PLCs, frequency converters, industrial … -
Explosion-proof integrated temperature and vibration sensor
Introduction Explosion-proof integrated temperature and vibration sensor can measure the temperature and vibration (displacement, velocity, acceleration) of the equipment, and can simultaneously monitor the XYZ three-axis vibration value and surface temperature of the equipment Specification Sensitivity 20mv/mm/s±0.3% ~ 50mv/mm/s±0.3% Frequency response 10～1000Hz Natural frequency 10Hz Range 0～20 mm/s，0-30mm/s,0-50mm/s…… …
